Vintage Easter Dresses

Oooh- the word "vintage" has become oh, so trendy.

Yes, I am jumping on the bandwagon.

It started out with this...

...two flat vintage sheets that my nana bought maybe in the 1970s and vintage trims, notions, and buttons given to me by some friends. The colors matched perfectly. There are 5 colors in the sheets (other than white) and I have 5 girls, so they each got their own accent color.

So, after 6 days of wild sewing, early Easter morning my girls were wearing new dresses from the vintage sheets that belonged to their great-great-grandmother.

I am so blessed to be able to do something special like this for my girls.

Tutorials coming soon(ish)...

***UPDATE*** Here are the tutorials and full posts for each dress!

vintage-sheet-easter-dresses

Sunrise Dress Tutorial

Blushing Izzy Dress Tutorial

Lydia’s Sweetheart Dress Tutorial

Gracie Dress Tutorial

Vintage Baby Collar Tutorial

Turtleneck to Maxi Skirt Tutorial

This one has been a long time coming! I finally got some cute pics of my daughter in her maxi skirt so that I could finish up this post!  Last spring, when I was on my maxi skirt sewing kick, my 5yo had requested a RED one. Well, I thought I would just pick some fabric up at a nearby Walmart, but they no longer carry ANY knit at that store! :( So, I wandered over towards the clothing and found a Women's XL red turtleneck on clearance for $1!

This was a super cheap and easy project. I even had enough left over to make her a headband (which we forgot about when taking these pictures- that is what happens when you wait all summer!) and a matching skirt and headband for her doll (see THIS post if you care.)

I am not sure what she is doing with her hands here...

This skirt is so comfy (not that I actually wore it, but, you know, she did) and it doesn't slow her down and keep her from playing hard- which is a must for kids' clothing. Are those enough selling points for you? Well, they should be. If you make one, pretty please show me some pics! OK?  Good.  Here is your free tutorial...

I thought the neck looked like it would fit her waist so I had her try it on. It was a perfect fit! (My kids might think I am crazy. You know, "Here, honey. Put this turtleneck on, but put the neck around your waist. OK?") If it is too big, you can just take it in after you cut it off. You want it to fit snugly, so it has to be a little smaller than the actual waist measurement. (I guess I could have just measured instead.)

Anyway... cut the neck off, then fold the shirt in half. Measure the height needed from waist to ankles.  Starting that distance from the bottom, draw a line that is one quarter of the total measurement of the neck/waist/whatever. Then, draw an a-line to the bottom of the shirt. You are keeping the original hem of the shirt (SWEET!) I hope this step is not too confusing.  Just follow the picture...

Sew the side seams of the skirt, right sides together.  You can use a zig-zag or stretch stitch or a serger. I used a stretch stitch and then overlocked the edges for extra durability.

Pin the neckband to the inside of skirt.

Sew it together. This is what it looks like, inside out.

Flip it around and press.

TADA!  It really only took about 15 minutes to make.  Definitely a hit!

As always, this tutorial is for personal, non-commercial use only. No copycats. Got it? Thanks!

Regular to Maternity T-Shirt Refashion Tutorial

Please excuse the photographer's finger in the top corner there. :)

Usually I do not sew many things for myself and I am not usually all that picky when it comes to clothing. BUT, I saw these T-shirts on sale at Target in CUTE colors and I just really, really wanted them! So I splurged. On myself.  That almost NEVER happens!  Here is how I mentally justified it: Maternity T-shirts are way more expensive (I got this shirt for $5 on sale in the Women's section, but I saw similar maternity ones online at Target.com for $15).  The maternity T-shirts I already have are in dark colors (plus everything is getting too short for my belly these days). I figured I could buy XL and XXL shirts for the length and alter them.  Ready to see how I did that? Let's go!

Start out with an XL or XXL shirt. For some reason, I didn't even take the tags or sticker off until I was done. It wasn't like I was going to return it.

You need to carefully trim off the side seams from the armpit down.

Fold the shirt in half.  Using a shirt that fits well as a pattern, mark where the arm scythe should be and cut off the sleeves and down the sides gently on an angle as shown. You can see that my arm scythe is higher and narrower in the shoulders vs the original shirt.

Trim up the sleeves to fit the arm scythe, plus a little seam allowance at the bottom. This pic shows the before and after so you can get an idea...

Now, here is the part I thought was so clever... Take the back of the shirt only (the front side is pushed away at the top there) and trim the sides to make them straight. (The shirt naturally flared out quite a bit towards the bottom, which I need in the front, but I didn't want a whole lot of extra bunching in the back.)

This is what you should have so far. These are all of the pieces and the back is actually on top so that you can see the difference between the front and back.

Sew up the side seams with a serger or using a stretch stitch on your sewing machine.  If you use a serger, make sure to tuck those tails of thread in when you are finished.  Sew the bottoms of the sleeves together, too.

Just pin the sleeve to the arm and reattach using a serger or stretch stitch. I suppose, if you wanted to, you could sew the sleeve on first and then sew all the way down the side from the edge of the sleeve to the bottom of the shirt.  This is just how I did it. Whatever works.

You can leave the shirt like this if you want (see all of the extra roominess in the front), but it was still too long in the back for my liking. I need the length for the front, though, so I decided to add ruching in the sides.

Decide how high you want the ruching to go, measure from there to the bottom of the shirt, then cut a piece of 1/4" elastic half of that length.  Pin the ends in place on the side seam allowance.

Just pull the elastic tight as you sew.  The elastic should be sewn to the side seam allowance only, so you won't see the stitching on the outside of the shirt when it is finished.

TADA! That is it!!  It really didn't take me long at all- maybe a half hour, and it theoretically saved me $10. Plus, it is a custom-fit shirt that actually covers my belly! Woohoo!

Here is the other shirt I altered. I didn't add the ruching because it was already on the short side, but I might go back and add some in later. We'll see. If I feel like it.

You can't tell by the super sunny pic my 5yo took for me, but this shirt is an awesome minty aqua color. Oh, and in case you are wondering, I am 29 weeks here. Yeah. 2 1/2 months to go. Yes, there is just one baby in there.  Feel free to laugh. I am used to it.

 So, there you go! If you could snag some great thrift or clearance deals, this would be a great money-saver! It was easy and if I don't stain them up this summer (forget putting your napkin on your lap- my belly catches everything!) I will probably cut the sides open to take them in again post-baby. It would only take, like, 10 minutes. Maybe 15 if I hem the bottom to make it shorter. Yes, I am still justifying my splurging impulse buy here. :)

Linking up to:
Craftastic Monday, Motivate Me Monday, Made By You Monday, Take a Look Tuesday, Tasteful Tuesdays, Carolyn's Homework, The Winthrop Chronicles, Handmade Tuesdays, Inspiration Exchange, Sugar and Spice, Whatever Goes Wednesday, Make Bake Create Party, We Did It Wednesday, What I Wore, Read, And Made, Show Me What Ya Got, Lil' Luna, Adorned From Above, Off the Hook, Your Whims Wednesday, Show Off Your Stuff Party, You Inspired, The 36th Party, Hookin Up with HoH, Link Love Thursday, Blog Stalking Thursday, The Homemaking Party, Creative Inspiration Party, Create It Thursday, Shine On Friday, Friday Favorites, Friday Favs Party, Think Pink Sundays, and ThreadingYourWay. 

Car Roll Tutorial

In my attempt to be the coolest aunt ever (I have 22 nieces and nephews so far!), I made this cute little car roll. It is made from some fabric I had on hand (it’s hard to find non-girly stuff in this family!) and some size 4T jeans that were headed for the garbage. I was inspired by THIS tutorial, but I wanted to do a few things differently:
a) I don’t have duck cloth and I don’t know where to get it. Hence the denim.
b) Sewing on little bitty pieces of yellow felt didn’t sound like fun. So I channeled my inner quilter and made the road that way.
c) I rolled it instead of folding so I didn’t go all fancy on the outside and I skipped the stenciling cause I didn’t feel like it.
d) I made my own strap to velcro on from fabric.

So without further ado... here is my version of the Look at that- a title photo just for this post! I am going all fancy here (OK, so I just got a cool close up and wanted to use it). I took the best pictures that I could get since PA is seeming more like Seattle these days. Of course, the sun came out when I was done, but I am not complaining ‘cause I missed it sooooo much! So forgive all of the poor quality pics. I tried.

Materials:

Black cotton
Yellow cotton
Any cotton for the pocket
1 ½ legs from an old pair of kids’ jeans
3/4" piece of Velcro
Thread

Part 1: The Road

Do all the cutting first and get it out of the way. You will need 2 pieces of black cotton measuring 2 3/4" by 14" for the "lanes" and for the "dashes" in the middle, you will need one piece EACH of black and yellow measuring 1 1/2" by 14". Sew the 2 small strips of black and yellow together lengthwise, then cut into 1" strips. Sew them all short ends together, alternating yellow and black. Then sew this row between the strips and press towards the "lanes" and you are all done with the road! EASY!

Part 2: The Velcro Strip

You will need a piece of cotton measuring 4" by 6" ( I just used yellow cause it was already 4" wide). Lots of ironing here- press in half lengthwise, open, and then press the edges in toward the center. Open it all up, hem in the end 1/4", and then sew your loopy velcro on one side just after the hem so the little box will be hidden. Fold the sides toward the center... ...and press it half. Then topstich around three sides, leaving the non-velcro side alone. See? No box on the other side.
Part 3: The Pockets

Now we are getting into the denim. Cut one piece from the pants 14" by 5 1/2" and from your other cotton cut a piece 14" by 6". Press the cotton in half, wrong sides together, and sew the raw bottom edges of the denim and cotton together (Good way to cover up a few stains here!)Topstitch the folded edge of the cotton just to keep it in place better. Then sew lines for pockets - mine were at about the the following intervals: 2 5/8", 4 7/8", 7", 9 1/8", and 11 1/4"
Part 4: The Outside

Take the remaining 2 pieces of denim, cut them to 14" by 5.5", and sew them together lengthwise and press the seams open.Sew the fuzzy piece of velcro on at 6" from the left end of the bottom piece and about 2 1/2" from the bottom edge.
Part 5: Assembly

Sew the two inside pieces together.Sew the raw-edge end of the velcro strip to the bottom, velcro up, lined up with the edge of the pocket. Go over it a bajillion times.

Sew the outside and inside together, right sides together, leaving the non-velcro end open, and flip (push those corners out real good!)Fold the opening edges in and topstitch the whole way around and down the middle, too. I used white thread cause I didn't feel like changing it, but I like it! It's kind of like road edges.

Part 6: PLAY!

I was so disappointed that I could only find Sheriff Rosco's car and not the General Lee. :( But Rosco always loses! Fold. And roll. Secure with velcro. Perfect to tuck away in Mom's purse or a backpack!